²é¿´ÍêÕû°æ±¾: [-- ºì¾ü³¤Õ÷ϵÁÐÊéϵ--¸ß·Ö×Ó×Ó£¨·¢²¼Êé¼®Õ߸úÓë´ËÌûºó£¬·ñÔò²»ÓèÆÀ·Ö£© --]

ºì¾ü³¤Õ÷×ÔÓɹ²Ïí -> ²ÄÁÏ¿ÆÑ§Ó빤³Ì -> ºì¾ü³¤Õ÷ϵÁÐÊéϵ--¸ß·Ö×Ó×Ó£¨·¢²¼Êé¼®Õ߸úÓë´ËÌûºó£¬·ñÔò²»ÓèÆÀ·Ö£© [´òÓ¡±¾Ò³] µÇ¼ -> ×¢²á -> »Ø¸´Ö÷Ìâ -> ·¢±íÖ÷Ìâ

<<   1   2  >>  Pages: ( 2 total )

dejunchem 2007-11-07 12:35

Ϊ°å¿é×ÊÔ´¸ü·½±ãÕ½ÓѲéÕÒ£¬Ìؽ«±¾°æÊéÄ¿ÕûÀí
ÄÚÈݰüÀ¨ÊéÃû£¬Á´½Ó¼°½éÉÜ¡£
ÇëÕ½ÓÑ·¢Ìûºóµ½´Ë¸úÌû£¡ÓÐÎÊÌâ¿Éµ½
ºì¾ü³¤Õ÷ϵÁÐÊéϵ ÎÊÌâÌÖÂÛÌû Öз¢±í£¡
лл£¡
×¢Òâ¸ñʽŶ£¡

dejunchem 2007-11-07 12:37
¾­µäºÃÊéPolymer Handbook.pdf(134M)
The purpose of the Polymer Handbook is to bring together A critical evaluation of the values published in the
the data and constants needed in theoretical and experi- literature was not attempted, since such a task would have
mental polymer research. All polymer researchers have required an inordinate amount of time and a sizable staff.
experienced the frustration of searching for data in the ever- Therefore, the users of this Handbook should consult the
expanding polymer literature and know the difficulties original literature for details when in doubt about the
involved in trying to locate a particular constant that is validity of any data. (The authors of the individual tables
buried in a long journal article. The contributors to this were nevertheless requested to eliminate obviously erro-
Handbook have taken on the arduous task of searching the neous data from otherwise complete compilations.)
literature and compiling the data and constants that polymer The Fourth Edition revisions have focused on data
chemists, polymer physicists, and polymer engineers are generated in the ten years since the publication of the Third
likely to need. Edition. Therefore, a completely revised Polymer Hand-
The 520 and odd tables in this Handbook are divided into book has been prepared. We have added new tables and
eight sections. The first lists the IUPAC nomenclature rules incorporated a large amount of new data into existing
for polymers and the International System of Units. tables. As a result, the Fourth Edition contains approxi-
Although several naming conventions exist in the technical mately twenty-five percent more data, and the number of
literature, IUPAC names permit a consistent listing of all pages has increased from about 1850 in the Third Edition to
polymers. Section II contains data and constants needed for about 2250.
polymer synthesis, kinetic mechanisms, and thermody- We hope that this new edition will be as useful to the
namic studies of polymerization and depolymerization polymer research community as the three earlier editions
reactions. Sections III and IV contain physical constants and that many of the Polymer Handbook's previous users
of monomers, solvents, and oligomers. Section V lists the will also obtain the Fourth Edition for their laboratory and
physical constants of many important commercial poly- library.
mers. Section VI and VII cover the solid state properties of The publisher plans a CD-ROM for the Polymer
polymers and the properties of polymer solutions. Section Handbook in the near future. We would be grateful if our
VIII of the Handbook lists the commonly used abbrevia- contributors and users send us any new data they
tions or acronyms for polymers and Chemical Abstract accumulate in the course of their research, and any errors,
Registry Numbers, and gives suggestions for electronic data misprints, omissions and other flaws. We will pass on such
searching for polymer information. This section should also data to the publisher, for the polymer database, and for
be consulted in the few cases where contributors have not future editions of this Handbook.
used IUPAC nomenclature. We would like to thank all of the contributors to the
As in the previous editions, the Polymer Handbook Polymer Handbook for their help and continued patience.
concentrates on synthetic polymers, poly(saccharides) and The staff at John Wiley, especially Carla Fjerstad, Shirley
derivatives, and oligomers. Few data on biopolymers are Thomas, and Jacqueline Kroschwitz, have provided excel-
included. Spectroscopic data as well as data needed by lent help and support in getting all the work done. We hope
engineers and designers, such as mechanical and rheologi- that the outstanding efforts of all these people will find due
cal data, are minimized, since many excellent compilations appreciation among the users of this Handbook.
exist elsewhere. Only fundamental constants and para-
meters that refer to the polymer molecule, that describe the July, 1998 J. Brandrup
solid state of polymer molecules, or that describe polymer E. H. Immergut
solutions, were compiled. Constants that depend on E. A. Grulke
processing conditions or on sample history were not A. Abe
emphasized, as they can be found in existing plastics D. R. Bloch
handbooks and encyclopedias.

http://www.91files.com/?TQZ67AN01FGBJ7NL401M
http://www.91files.com/?0XF3FLM2GBS92IHL87CQ
http://www.91files.com/?YZGRCSB1YWJTHFQJ17TU

ÓÉyysÕ½ÓÑÌṩ¸Ðл£¡

dejunchem 2007-11-07 12:39
×îÐÂÓÐÉ«½ðÊô½ðÏàͼÆ×´óÈ«


Îĵµ¸ñʽ£ºPDF£¨·ÇɨÃ裬´øÊéÇ©£©
90À´M Ðèµç¿ÏÂÔØ£¡ËÙ¶È¿ÉÒÔ£¡
ÏÂÔØÁ´½ÓµØÖ·£ºhttp://lib.verycd.com/2007/04/04/0000145568.html



Ŀ¼
µÚһƪ ÖýÔìÂÁºÏ½ð½ðÏàͼÆ×
µÚÒ»Õ ÖýÔìÂÁºÏ½ð¸ÅÊö
µÚ¶þÕ ÂÁ£­¹èϵΪ»ùµÄÖýÔìºÏ½ð
µÚÈýÕ ÂÁ£­Í­ÏµÎª»ùµÄÖýÔìºÏ½ð
µÚËÄÕÂ ÂÁ

£­Ã¾ÏµÎª»ùµÄÖýÔìºÏ½ð
µÚÎåÕ ÂÁ£­Ð¿ÏµÎª»ùµÄÖýÔìºÏ½ð
µÚÁùÕ ÂÁ£­Ï¡ÍÁ½ðÊôΪ»ùµÄÖýÔìºÏ½ð
µÚÆßÕ ÖýÔìÂÁºÏ½ð±ê×¼½ðÏàͼƬ

µÚ¶þƪ îѺϽð½ðÏàͼÆ×
µÚÒ»Õ îѼ°ÆäºÏ½ðµÄ×éÖ¯·ÖÎö·½·¨
µÚ¶þÕ ×îÖØÒªµÄîÑ»ùϵͳ״̬ͼ
µÚÈýÕ îѺϽðµÄÐÔÄÜÓëÏà×é³ÉµÄ¹ØÏµ
µÚËÄÕ Öý¼°ÆäºÏ½ðµÄµäÐÍ×éÖ¯
µÚÎåÕ îѺϽðµÄÐÔÄÜÓëÆäÏÔ΢×éÖ¯µÄ¹ØÏµ
µÚÁùÕ ¹¤ÒµîѺϽðµÄ×éÖ¯ºÍÐÔÄÜ
µÚÆßÕ ÈÈÇ¿îѺϽðµÄ×éÖ¯ºÍÐÔÄÜ
µÚ°ËÕ ȱÏݵĽðÏà

µÚÈýƪ Äø»ùºÏ½ð½ðÏàͼÆ×
µÚÒ»Õ ±äÐÎÄø»ùºÏ½ð½ðÏàͼÆ×
µÚ¶þÕÂ Äø»ùÖýÔìºÏ½ð½ðÏàͼÆ×

µÚËÄÆª ÆäËüÓÐÉ«½ðÊô½ðÏàͼÆ×
µÚÒ»Õ ͭºÏ½ð½ðÏàͼÆ×
µÚ¶þÕ þºÏ½ð½ðÏàͼÆ×
µÚÈýÕ ¹è¼°¹èºÏ½ð½ðÏàͼÆ×
µÚËÄÕ п¼°Ð¿ºÏ½ð½ðÏàͼÆ×
µÚÎåÕ Ã̼°Ã̺Ͻð½ðÏàͼÆ×

µÚÎåÆª ÓÐÉ«½ðÊô½ðÏàÏÔ΢¾µµÄ¹âѧԭÀíÓëÏÔ΢¾µµÄ²Ù×÷¼°Ó¦ÓÃ
µÚÒ»Õ ½ðÏàÏÔ΢¾µµÄ¹âѧԭÀí
µÚ¶þÕ ÆÕͨ¹âѧ½ðÏàÏÔ΢¾µ
µÚÈýÕ ƫÕñ¹âÏÔ΢¾µ
µÚËÄÕÂ Ç¬ÉæÏÔ΢¾µ
µÚÎåÕ Ïà³Ä½ðÏàÏÔ΢¾µ

µÚÁùƪ ÓÐÉ«½ðÊô½ðÏàÊÔÑùµÄÖÆ±¸¼°½ðÏàÏÔ΢ÉãÓ°¼¼Êõ
µÚÒ»Õ ÓÐÉ«½ðÊô½ðÏàÖÆÑùÉ豸¼°¼¼Êõ
µÚ¶þÕ ÓÐÉ«½ðÊô½ðÏàÊÔÑùµÄ½ØÈ¡ÓëÏâǶ
µÚÈýÕ ÓÐÉ«½ðÊô½ðÏàÊÔÑùµÄÄ¥¹âÓëÅ×¹â
µÚËÄÕ ÓÐÉ«½ðÊô½ðÏàÊÔÑùÏÔ΢×éÖ¯µÄÏÔʾ
µÚÎåÕ ÓÐÉ«½ðÊô½ðÏàÏÔ΢ÉãÓ°¼°°µÊÒ¼¼Êõ

µÚÆßƪ ÓÐÉ«½ðÊô½ðÏà×éÖ¯µÄ¶¨ÐÔÓ붨Á¿·ÖÎö
µÚÒ»Õ ÓÐÉ«½ðÊô²ÄÁϽðÏàÆÀÎö±ê×¼
µÚ¶þÕ ÓÐÉ«½ðÊô²ÄÁϵÄÎïÀí¼ì²â
µÚÈýÕ ÓÐÉ«½ðÊô²ÄÁϵÄȱÏÝ·ÖÎö
µÚËÄÕ ÓÐÉ«½ðÊô¶¨Á¿½ðÏà
µÚÎåÕ ÏÔ΢Ӳ¶ÈÔÚÓÐÉ«½ðÊôÏàÑо¿ÖеÄÓ¦ÓÃ
µÚÁùÕ ÓÐÉ«½ðÊô½ðÏàÈÈ´¦Àí¼ì²â±ê×¼

ÓÉyysÕ½ÓÑÌṩ¸Ðл£¡

dejunchem 2007-11-07 12:41
¡¶¾Û°±õ¥½ºÕ³¼Á¡·£¬PDFÎļþ£¬9.7M ¡£
´«µ½ºé²¨ÍøÂçÉÏÁË£¬´ó¼Ò×¢²áÒ»¸ö¾ÍÄÜÏÂÁË¡£
ÏÂÔØµØÖ·£ºhttp://media.imhb.cn/login.aspx?confirm=1&gourl=http%3a%2f%2fmedia.imhb.cn%2fmyspace%2fdownload.aspx%3fMSAutoID%3d70800%26huid%3d475076

ÄÚÈݼò½é
±¾Êé½ÏÈ«ÃæµÄ½éÉÜÁ˵¥×é·Ö¾Û°±õ¥½ºÕ³¼Á¡¢Ë«×é·Ö¾Û°±õ¥½ºÕ³¼Á¡¢Ë®ÐÔ¾Û°±õ¥¡¢¶àÒìÇèËá¾Û½ºÕ³¼Á¡¢¾Û°±õ¥Ãܷ⽺¡¢¾Û°±õ¥Õ³ºÏ¼ÁµÄÖÆÔìÓëÓ¦Óü¼Êõ£¬ÒÔ¼°¾Û°±õ¥½ºÕ³¼ÁÔ­ÁÏ¡¢¾Û°±õ¥½ºÕ³¼ÁµÄÕ³½á»úÀíÓëÐÔÄܲâÊÔ·½·¨¡£

Ŀ¼
µÚÒ»Õ£ºÐ÷ÂÛ
µÚ¶þÕ£º¾Û°±õ¥»¯Ñ§¼°Õ³½á»úÀí
µÚÈýÕ£º¾Û°±õ¥½ºÕ³¼ÁÔ­ÁÏ
µÚËÄÕ£º¶àÒìÇèËáõ¥½ºÕ³¼Á
µÚÎåÕ£ºË«×é·Ö¾Û°±õ¥½ºÕ³¼Á
µÚÁùÕ£ºµ¥×é·Ö¾Û°±õ¥½ºÕ³¼Á
µÚÆßÕ£ºË®ÐÔ¾Û°±õ¥½ºÕ³¼Á
µÚ°ËÕ£º¾Û°±õ¥Õ³ºÏ¼Á
µÚ¾ÅÕ£º¾Û°±õ¥Ãܷ⽺
µÚʮգº·ÖÎöºÍ²âÊÔ
¸½Â¼
¸½Â¼Ò»£º¹úÄÚ¾Û°±õ¥½ºÕ³¼ÁÑо¿µ¥Î»
¸½Â¼¶þ£º¾Û°±õ¥½ºÕ³¼ÁÔ­ÁÏÉú²ú³§¼Ò
¸½Â¼Èý£º¾Û°±õ¥½ºÕ³¼ÁÉú²ú³§¼Ò
¸½Â¼ËÄ£ºÖ÷Òª½ºÕ³¼ÁÆÚ¿¯
    ɾ



×îÐÂÓÐÉ«½ðÊô½ðÏàͼÆ×´óÈ«


Îĵµ¸ñʽ£ºPDF£¨·ÇɨÃ裬´øÊéÇ©£©
90À´M Ðèµç¿ÏÂÔØ£¡ËÙ¶È¿ÉÒÔ£¡
ÏÂÔØÁ´½ÓµØÖ·£ºhttp://lib.verycd.com/2007/04/04/0000145568.html



Ŀ¼
µÚһƪ ÖýÔìÂÁºÏ½ð½ðÏàͼÆ×
µÚÒ»Õ ÖýÔìÂÁºÏ½ð¸ÅÊö
µÚ¶þÕ ÂÁ£­¹èϵΪ»ùµÄÖýÔìºÏ½ð
µÚÈýÕ ÂÁ£­Í­ÏµÎª»ùµÄÖýÔìºÏ½ð
µÚËÄÕÂ ÂÁ

£­Ã¾ÏµÎª»ùµÄÖýÔìºÏ½ð
µÚÎåÕ ÂÁ£­Ð¿ÏµÎª»ùµÄÖýÔìºÏ½ð
µÚÁùÕ ÂÁ£­Ï¡ÍÁ½ðÊôΪ»ùµÄÖýÔìºÏ½ð
µÚÆßÕ ÖýÔìÂÁºÏ½ð±ê×¼½ðÏàͼƬ

µÚ¶þƪ îѺϽð½ðÏàͼÆ×
µÚÒ»Õ îѼ°ÆäºÏ½ðµÄ×éÖ¯·ÖÎö·½·¨
µÚ¶þÕ ×îÖØÒªµÄîÑ»ùϵͳ״̬ͼ
µÚÈýÕ îѺϽðµÄÐÔÄÜÓëÏà×é³ÉµÄ¹ØÏµ
µÚËÄÕ Öý¼°ÆäºÏ½ðµÄµäÐÍ×éÖ¯
µÚÎåÕ îѺϽðµÄÐÔÄÜÓëÆäÏÔ΢×éÖ¯µÄ¹ØÏµ
µÚÁùÕ ¹¤ÒµîѺϽðµÄ×éÖ¯ºÍÐÔÄÜ
µÚÆßÕ ÈÈÇ¿îѺϽðµÄ×éÖ¯ºÍÐÔÄÜ
µÚ°ËÕ ȱÏݵĽðÏà

µÚÈýƪ Äø»ùºÏ½ð½ðÏàͼÆ×
µÚÒ»Õ ±äÐÎÄø»ùºÏ½ð½ðÏàͼÆ×
µÚ¶þÕÂ Äø»ùÖýÔìºÏ½ð½ðÏàͼÆ×

µÚËÄÆª ÆäËüÓÐÉ«½ðÊô½ðÏàͼÆ×
µÚÒ»Õ ͭºÏ½ð½ðÏàͼÆ×
µÚ¶þÕ þºÏ½ð½ðÏàͼÆ×
µÚÈýÕ ¹è¼°¹èºÏ½ð½ðÏàͼÆ×
µÚËÄÕ п¼°Ð¿ºÏ½ð½ðÏàͼÆ×
µÚÎåÕ Ã̼°Ã̺Ͻð½ðÏàͼÆ×

µÚÎåÆª ÓÐÉ«½ðÊô½ðÏàÏÔ΢¾µµÄ¹âѧԭÀíÓëÏÔ΢¾µµÄ²Ù×÷¼°Ó¦ÓÃ
µÚÒ»Õ ½ðÏàÏÔ΢¾µµÄ¹âѧԭÀí
µÚ¶þÕ ÆÕͨ¹âѧ½ðÏàÏÔ΢¾µ
µÚÈýÕ ƫÕñ¹âÏÔ΢¾µ
µÚËÄÕÂ Ç¬ÉæÏÔ΢¾µ
µÚÎåÕ Ïà³Ä½ðÏàÏÔ΢¾µ

µÚÁùƪ ÓÐÉ«½ðÊô½ðÏàÊÔÑùµÄÖÆ±¸¼°½ðÏàÏÔ΢ÉãÓ°¼¼Êõ
µÚÒ»Õ ÓÐÉ«½ðÊô½ðÏàÖÆÑùÉ豸¼°¼¼Êõ
µÚ¶þÕ ÓÐÉ«½ðÊô½ðÏàÊÔÑùµÄ½ØÈ¡ÓëÏâǶ
µÚÈýÕ ÓÐÉ«½ðÊô½ðÏàÊÔÑùµÄÄ¥¹âÓëÅ×¹â
µÚËÄÕ ÓÐÉ«½ðÊô½ðÏàÊÔÑùÏÔ΢×éÖ¯µÄÏÔʾ
µÚÎåÕ ÓÐÉ«½ðÊô½ðÏàÏÔ΢ÉãÓ°¼°°µÊÒ¼¼Êõ

µÚÆßƪ ÓÐÉ«½ðÊô½ðÏà×éÖ¯µÄ¶¨ÐÔÓ붨Á¿·ÖÎö
µÚÒ»Õ ÓÐÉ«½ðÊô²ÄÁϽðÏàÆÀÎö±ê×¼
µÚ¶þÕ ÓÐÉ«½ðÊô²ÄÁϵÄÎïÀí¼ì²â
µÚÈýÕ ÓÐÉ«½ðÊô²ÄÁϵÄȱÏÝ·ÖÎö
µÚËÄÕ ÓÐÉ«½ðÊô¶¨Á¿½ðÏà
µÚÎåÕ ÏÔ΢Ӳ¶ÈÔÚÓÐÉ«½ðÊôÏàÑо¿ÖеÄÓ¦ÓÃ
µÚÁùÕ ÓÐÉ«½ðÊô½ðÏàÈÈ´¦Àí¼ì²â±ê×¼

ÓÉyysÕ½ÓÑÌṩ¸Ðл£¡

dejunchem 2007-11-07 23:20
¡¶¸ß·Ö×Ó·ÖÎöÊֲᡷ(21.4M)

ÄÚÈݼò½é
±¾Êé·ÖΪÁ½²¿·Ö£¬µÚһƪΪ¸ß·Ö×ӵĻ¯Ñ§·ÖÎö£¬°üÀ¨¸ß·Ö×Ó×é³ÉµÄ¶¨ÐԺͶ¨Á¿·ÖÎö£¬²»½öÓоßÌåµÄʵÑé·½·¨£¬»¹ÌṩÁË´óÁ¿µÄÊý¾Ý£¬·½±ã¶ÁÕßÓ¦ÓᣵڶþƪΪ¸ß·Ö×Ó²ÄÁϵÄÒÇÆ÷·ÖÎö£¬Éæ¼°µÄ·ÖÎö·½·¨´ïËÄÊ®ÎåÖÖ£¬Öصã½éÉÜÁËÿһÖÖÏÖ´ú·ÖÎö·½·¨Ôڸ߷Ö×Ó×é³É¼°½á¹¹·ÖÎöÖеÄʹÓ÷¶Î§£¬ÑùÆ·ÖÆ±¸¼¼Êõ£¬Æ×ͼ½âÎö£¬Ó¦ÓÃʵÀýµÈʵÓÃÄÚÈÝ¡£
Ŀ¼
µÚһƪ£º¸ß·Ö×Ó²ÄÁϵĻ¯Ñ§·ÖÎö
µÚÒ»Õ£º¼òµ¥¶¨ÐÔ·ÖÎö
µÚ¶þÕ£º¸ß·Ö×Ó²ÄÁϵķÖÀëºÍ´¿»¯
µÚÈýÕ£ºÔªËؼì²â
µÚËÄÕ£º¹ÙÄÜÍŵ͍Á¿»¯Ñ§·ÖÎö
µÚÎåÕ£º¸÷Àà¸ß·Ö×ÓµÄÌØÊⶨÐÔ¼ø±ðºÍ¶¨Á¿·ÖÎö
µÚÁùÕ£ºÌí¼Ó¼ÁµÄ·ÖÎö

µÚ¶þƪ£º¸ß·Ö×Ó²ÄÁϵÄÒÇÆ÷·ÖÎö
µÚÆßÕ£ººìÍâ¹âÆ×ºÍ¼¤¹âÀ­Âü¹âÆ×·¨
µÚ°ËÕ£º½üºìÍâ¹âÆ×·¨ºÍÔ¶ºìÍâ¹âÆ×·¨
µÚ¾ÅÕ£ºµç×Ó¹âÆ×·¨
µÚʮգºÔªËØ·ÖÎöµÄ¹âÆ×·¨
µÚʮһÕ£ººË´Å¹²ÕñÆ×·¨ºÍµç×Ó×ÔÐý¹²ÕñÆ×·¨
µÚÊ®¶þÕ£ºÉ«Æ×·¨
µÚÊ®ÈýÕ£ºÈÈ·ÖÎö·¨
µÚËÄʮգº¹âѧÏÔ΢·¨ºÍɨÃè̽ÕëÏÔ΢¾µ
µÚÊ®ÎåÕ£º¼¤¹âС½Ç¹âÉ¢Éä·¨
µÚÊ®ÁùÕ£ºµç×ÓÏÔ΢¾µ·¨
µÚÊ®ÆßÕ£ºXÉäÏß·¨
µÚÊ®°ËÕ£ºÓлúÖÊÆ×ºÍ¾²Ì¬´Î¼¶Àë×ÓÖÊÆ×


http://www.91files.com/?MZ7MB17UNFH02ML57Z97

dejunchem 2007-11-07 23:21
Multiscale Materials Modelling

Multiscale Materials Modelling

Multiscale Materials Modelling
Publisher:   Woodhead Publishing
Number Of Pages:   312
Publication Date:   2007-06-30
Sales Rank:   562353
ISBN / ASIN:   1845690710
EAN:   9781845690717
Binding:   Hardcover
Manufacturer:   Woodhead Publishing
Studio:   Woodhead Publishing

http://mihd.net/4f0i7m
http://rapidshare.com/files/66130422/1845690710.rar

dejunchem 2007-11-07 23:22
07ÐÂÊéÃâ·ÑÏÂÔØ£ºMechanical Behaviour of Engineering Materials


Mechanical Behaviour of Engineering Materials

Metals, Ceramics, Polymers, and Composites

Library of Congress Control Number:
ISBN 978-3-540-73446-8 Springer Berlin Heidelberg New York

2007 Springer



http://mihd.net/3enycb

dejunchem 2007-11-07 23:29
XÉäÏß¹âµç×ÓÄܯ׷ÖÎö×ÊÁÏ

¡¶µç×ÓÄܯס·µÄÒ»²¿·Ö

ÄÚÈݰüÀ¨£º
XPSµÄÎïÀí»ù´¡
½áºÏÄÜÓë»¯Ñ§Î»ÒÆ
XPSÆ×µÄÒ»°ãÌØÐÔ
¶¨ÐÔ·ÖÎö
¶¨Á¿·ÖÎö
XPSÆ×ÒǼ¼Êõ
Éî¶ÈÆÊÎöÓë³ÉÏñXPS
Êý¾Ý´¦Àí
½áÂÛ

ϲ»¶µÄÖ§³Öһϣ¬Ð»Ð»


ÃèÊö£ºXPS£¨XÉäÏß¹âµç×ÓÄܯף©·ÖÎö»ù´¡pdf×ÊÁÏ
Á´½Ó£ºhttp://www.hjcz.org/bbs/read.php?tid-93482.html

dejunchem 2007-11-07 23:30
¸ß·Ö×Ó±íÃæ»îÐÔ¼Á


ÉòÒ»¶¡±àÖø£¬»¯Ñ§¹¤Òµ³ö°æÉç³ö°æ£¬È«Êé362Ò³¹²·ÖΪʮ¶þÕ£¬ÏµÍ³½²½âÁ˸߷Ö×Ó±íÃæ»îÐÔ¼ÁµÄÏà¹ØÖªÊ¶£¬Ï£Íû¿ÉÒÔ°ïÖú´ó¼ÒÈ¡µÃ½ø²½£¬pdf¸ñʽ¡£http://www.isload.com.cn/store/ietyw62363u4v
http://www.isload.com.cn/store/ietyw62363u4v

dejunchem 2007-11-07 23:35
Smart Textiles for Medicine and Healthcare: Materials, Systems and Applications

Smart Textiles for Medicine and Healthcare: Materials, Systems and Applications

By L. van Langenhove


Publisher: ?Woodhead Publishing Ltd
Number Of Pages: ?336
Publication Date: ?2007-02-28
Sales Rank: ?1137159
EAN: ?9781845690274
Binding: ?Hardcover
Manufacturer: ?Woodhead Publishing Ltd
Studio: ?Woodhead Publishing Ltd

http://mihd.net/9timb6

dejunchem 2007-11-07 23:36
ƽʱÊÕ¼¯µÄµç×ÓÊ飬ϣÍû´ó¼ÒÖ§³Ö


Encyclopedia of Materials Parts and Finishes (Second_Edition)
http://rapidshare.com/files/62174535/Encyclopedia_of_Materials__Parts__and_Finishes__Second_Edition_.pdf
Physics of Magnetism and Magnetic Materials
http://rapidshare.com/files/62175647/K.H.J.Buschow__F.R.de_Boer_-_Physics_of_Magnetism_and_Magnetic_Materials.pdf

Handbook of ChemOffice
http://rapidshare.com/files/62177196/Handbook_of_ChemOffice.pdf

Analytical Electrochemistry Third Edition
http://rapidshare.com/files/62202291/Analytical_Electrochemistry__Third_Edition_.pdf

Nanoscale Materials in Chemistry
[http://rapidshare.com/files/62204053/Nanoscale_Materials_in_Chemistry.pdf

Nanocrystalline Metals and Oxides
http://rapidshare.com/files/62400337/Nanocrystalline_Metals_and_Oxides__Knauth_P__Springer_2002.pdf

Carbon Nanotubes
http://rapidshare.com/files/62400919/Carbon_Nanotubes.pdf

Advances in Amorphous Semiconductors
http://rapidshare.com/files/62401648/Advances_in_Amorphous_Semiconductors.pdf

Analytical Electrochemistry (Third_Edition)
http://rapidshare.com/files/62401973/Analytical_Electrochemistry__Third_Edition_.pdf

Atomic and Molecular Clusters
http://rapidshare.com/files/62402498/Atomic_and_Molecular_Clusters.pdf

Encyclopedia of Materials Parts and Finishes (Second_Edition)
http://rapidshare.com/files/62404700/Encyclopedia_of_Materials__Parts__and_Finishes__Second_Edition_.pdf

Sol-Gel Science Technology
http://rapidshare.com/files/62414052/Sol-Gel_Science___Technology.pdf

Fundamental Ectrochemistry
http://rapidshare.com/files/62452972/Fundamental_ectrochemistry.pdf
Fundamentals of Semiconductor Manufacturing and Process Control
http://rapidshare.com/files/62453927/Fundamentals_of_Semiconductor_Manufacturing_and_Process_Control.pdf
Handbook of Electrochemistry
http://rapidshare.com/files/62459508/Handbook_of_Electrochemistry.pdf

Handbook of organic solvent properties
http://emuch.org/bbs/viewthread.php?tid=598980&fpage=4&sid=3yoItP

Handbook of Semiconductor Interconnection Technology
http://rapidshare.com/files/62467162/Handbook_of_Semiconductor_Interconnection_Technology.pdf

Inelastic Light Scattering of Semiconductor Nanostructures
http://rapidshare.com/files/62470899/Inelastic_Light_Scattering_of_Semiconductor_Nanostructures.pdf

Langes Chemistry Handbook Version 15th
http://rapidshare.com/files/62472825/Lange_s_Chemistry_Handbook_Version_15th.pdf

Low-Dimensional Molecular Metals
http://rapidshare.com/files/62474003/Low-Dimensional_Molecular_Metals.pdf

Metal-Catalysed Reactions of Hydrocarbons
http://rapidshare.com/files/62480931/Metal-Catalysed_Reactions_of_Hydrocarbons.pdf

Microanalysis in the electron microscope
http://rapidshare.com/files/62482320/Microanalysis_in_the_electron_microscope.pdf

Nanobiotechnology Concepts Applications and Perspectives
http://rapidshare.com/files/62491062/Nanobiotechnology_Concepts_Applications_and_Perspectives.pdf

Nanocrystalline Metals and Oxides
http://rapidshare.com/files/62492921/Nanocrystalline_Metals_and_Oxides__Knauth_P__Springer_2002.pdf

Nanoelectromechanics in Engineering and Biology
http://rapidshare.com/files/62494783/Nanoelectromechanics_in_Engineering_and_Biology.pdf

Nanoscale Assembly Chemical Techniques
http://rapidshare.com/files/6249 ... ical_Techniques.pdf

Nanoscale Materials in Chemistry
http://rapidshare.com/files/62496013/Nanoscale_Assembly_Chemical_Techniques.pdf

Nanotechnology Environmental Implications and Solutions
http://rapidshare.com/files/62497613/Nanoscale_Materials_in_Chemistry.pdf

Sensor Technology Handbook
http://rapidshare.com/files/62604557/Nanotechnology_Environmental_Implications_and_Solutions.pdf

Novel Nanocrystalline Alloys and Magnetic Nanomaterials
http://rapidshare.com/files/62605530/Newnes_-_Sensor_Technology_Handbook_by_Jon_S_Wilson__2005_.pdf

Physics of Magnetism and Magnetic Materials
http://rapidshare.com/files/62606972/Novel_Nanocrystalline_Alloys_and_Magnetic_Nanomaterials.pdf

Practical Handbook of Photovoltaics
http://rapidshare.com/files/62625163/Physics_of_Magnetism_and_Magnetic_Materials.pdf

Quantum Dots a Doorway to Nanoscale Physics
http://rapidshare.com/files/62627483/Practical_Handbook_of_Photovoltaics.pdf

Semiconductor_and_Metal_Nanocrystals.pdf
http://rapidshare.com/files/62627849/Quantum_Dots_a_Doorway_to_Nanoscale_Physics.pdf
http://rapidshare.com/files/62629370/Semiconductor_and_Metal_Nanocrystals.pdf

Semiconductor Physics And Devices 3rd_Ed
http://rapidshare.com/files/62638226/Semiconductor_Physics_And_Devices_3rd_Ed.part1.rar
http://rapidshare.com/files/62640163/Semiconductor_Physics_And_Devices_3rd_Ed.part2.rar

Semiconductor Safety Handbook
http://rapidshare.com/files/62641042/Semiconductor_Safety_Handbook.pdf

Silicon Nanoelectronics
http://rapidshare.com/files/62642581/Silicon_Nanoelectronics.pdf

Surfaces of Nanoparticles and Porous Materials.pdf
http://rapidshare.com/files/62645390/Surfaces_of_Nanoparticles_and_Porous_Materials.pdf

Thin film materials Stress defect formation and surface evolution
http://rapidshare.com/files/62642581/Silicon_Nanoelectronics.pdf

Understanding Carbon Nanotubes
http://rapidshare.com/files/62652478/Understanding_Carbon_Nanotubes.pdf

dejunchem 2007-11-07 23:36
Ñо¿Éúרҵ(²ÄÁÏ)Ó¢Óï½²Òå
Ñо¿Éúרҵ(²ÄÁÏ)Ó¢Óï½²Òå
http://www.hjcz.org/bbs/read.php?tid-98389.html

dejunchem 2007-12-02 23:32
ÏËÎ¬ËØ»¯Ñ§»ù´¡

×÷ÕߣºÁõÈÊÇì±àÖø
³ö°æÉ磺¿ÆÑ§³ö°æÉç

ÆäËûÕ¾µã»ñÈ¡

http://www.fs2you.com/files/a115c49c-a07d-11dc-bba0-0014221f4662/

´ËÌû±»ÆÀ·Ö,×î½üÆÀ·Ö¼Ç¼ÍþÍû:1(dejunchem)

dejunchem 2007-12-02 23:32
²»Ðâ¸Ö֪ʶ»ã×Ü×ÊÁÏ
ÍøÉÏÏÂÔØµÄ²»Ðâ¸Ö֪ʶ£¬Ï£Íû¶Ô¸÷λÓÐÓÃ
http://www.fs2you.com/zh-cn/files/9806478c-a08a-11dc-8484-0014221f4662/

´ËÌû±»ÆÀ·Ö,×î½üÆÀ·Ö¼Ç¼ÍþÍû:8(dejunchem)

dejunchem 2007-12-02 23:36
¸ß·Ö×ÓÎïÀíϰÌ⼯
http://www.hjcz.org/bbs/read.php?tid-16369.html

dejunchem 2007-12-02 23:37
²ÄÁϵļÆËã»úÄ£ÄâÊé ÇåÎú°æ
²ÄÁϵļÆËã»úÄ£ÄâÊé
http://www.hjcz.org/bbs/read.php?tid-98394.html

dejunchem 2007-12-02 23:37
ÏËÎ¬ËØ¿ÆÑ§

¸ß½à ÌÀÁÒ¹óÖ÷±à£»¿ÆÑ§³ö°æÉ磻±¾Êé¹²282Ò³£¬PDF¸ñʽ¡£

ÏËÎ¬ËØÀ´Ô´ÓÚÊ÷ľ¡¢ÃÞ»¨¡¢ÂéÀàÖ²ÎïºÍÆäËü¸±²úÆ·£¬ÊÇ×ÔÈ»½çÖÐȡ֮²»¾¡ÓÃÖ®²»½ßµÄ¿ÉÔÙÉú×ÊÔ´¡£ÏËÎ¬ËØ¿ÆÑ§ÊÇÑо¿ÏËÎ¬ËØ¼°Æä°éÉúÎ¡ª°ëÏËÎ¬ËØºÍľÖÊËØµÈÔÚÖ²ÎïÌåÄÚµÄÉúÎïºÏ³É¡¢½á¹¹¡¢³Á»ý·Ö²¼¼°ÊµÏÖÆäÎïÀíºÍ»¯Ñ§×ª±äµÄ¿ÆÑ§¡£

±¾Ê鹲ʮÈýÕ£¬·Ö±ðÓÉÎÒ¹úÔÚ´ËÁìÓòÄÚÖøÃûµÄר¼Ò¡¢½ÌÊÚÖ´±Ê¡£µÚÒ»ÕÂ×ÜÂÛ½éÉÜÏËÎ¬ËØµÄÀ´Ô´ºÍÖ²ÎïÏËάϸ°ûµÄ³¬Î¢½á¹¹¡£µÚ¶þÖÁËÄÕ·ֱð½éÉÜÏËÎ¬ËØµÄ·Ö×ӽṹ¡¢¾Û¼¯Ì¬½á¹¹ºÍ»¯Ñ§·´Ó¦¡£µÚÎåÖÁÆßÕ·ֱð½éÉÜÏËÎ¬ËØõ¥Àà¡¢ÃÑÀà¡¢»ìºÏõ¥ºÍ»ìºÏÃÑÀà¡£µÚ°ËÖÁʮһÕ·ֱð½éÉÜÏËÎ¬ËØµÄ½ÓÖ¦¹²¾Û¡¢½»Áª¡¢ÈÜÒººÍ½µ½â¡£µÚÊ®¶þ¡¢Ê®ÈýÕ½éÉܰëÏËÎ¬ËØºÍľÖÊËØ¡£

±¾Êé¿É¹©´ÓÊÂÏËÎ¬ËØ¿ÆÑ§Ñо¿¡¢¿ª·¢ºÍ½ÌѧµÄ¿Æ¼¼ÈËÔ±¼°Ñо¿Éú¡¢¸ßÄê¼¶±¾¿ÆÑ§ÉúÔĶÁ¡£


http://www.hjcz.org/bbs/read.php?tid-108626.html

dejunchem 2007-12-02 23:38
[ZT¿Î¼þ]ÅË׿Èʸ߷Ö×Ó»¯Ñ§PPT
http://www.hjcz.org/bbs/read.php?tid-48039.html

dejunchem 2007-12-02 23:38
Atom Transfer Radical Polymerization

http://www.hjcz.org/bbs/read.php?tid-108251.html

dejunchem 2007-12-03 19:21
DigitalMicrograph ¸ß·Ö±æÍ¸Éäµç¾µ·ÖÎö


¸ß·Ö±æÍ¸Éäµç¾µ·ÖÎöÈí¼þ,¿ÉÓÃ×÷¿ìËÙ¸µÁ¢Ò¶±ä»»µÈ

ÄäÃûÌáÈ¡ÎļþÁ¬½Ó http://pickup.mofile.com/5514063698508533
»òµÇ¼Mofile£¬Ê¹ÓÃÌáÈ¡Âë 5514063698508533 ÌáÈ¡Îļþ

´ËÌû±»ÆÀ·Ö,×î½üÆÀ·Ö¼Ç¼²ÝЬ:7(dejunchem)

dejunchem 2007-12-03 19:22
Solid State NMR of Polymers (Studies in Physical and Theoretical Chemistry)

Solid State NMR of Polymers (Studies in Physical and Theoretical Chemistry)

In polymer science and technology, the advanced development of various new polymer materials with excellent properties and functions is desirable. For this purpose it is necesary to determine the exact relationship between physical properties and molecular structure-dynamics with powerful techniques. One such technique is solid state NMR. Recently, high resolution NMR studies of solids have been realized by using advanced pulse and mechanical techniques, which has resulted in a variety of structural and dynamical information on polymer systems. Solid state NMR has provided characteristic information which cannot be obtained by other spectroscopic methods.

This book is divided into two parts. The first part covers the principles of NMR, important NMR parameters such as chemical shifts, relaxation times, dipolar interactions, quadrupolar interactions, pulse techniques and new NMR methods. In the second part, applications of NMR to a variety of polymer systems in the solid state are described.

Features of this book:

• Contains an up-to-date and comprehensive account of solid state NMR of polymers by leading researchers in the field

• Provides a compilation of solid state NMR of polymers, which makes it an ideal reference book for both NMR researchers and general polymer scientists.

This book will be of interest to the NMR community, and will be invaluable for both the beginner and the expert.

ÒÔϵØÖ·¿ÉÖ±½ÓÏÂÔØ£º
http://www.isload.com.cn/store/bu3n5ooc6kgdi
»ò
http://rapidshare.com/files/70773991/SOSTANMROP1.rar
http://rapidshare.com/files/70774057/SOSTANMROP2.rar
pass: SOSTANMROP1.rar_tF

´ËÌû±»ÆÀ·Ö,×î½üÆÀ·Ö¼Ç¼ÍþÍû:1(dejunchem)

dejunchem 2007-12-04 00:16
The Equilibrium Theory of Inhomogeneous Polymers


ÃèÊö£º1

The Equilibrium Theory of Inhomogeneous Polymers


The Equilibrium Theory of Inhomogeneous Polymers
By Glenn Fredrickson
* Publisher: Oxford University Press, USA
* Number Of Pages: 452
* Publication Date: 2006-01-06
* ISBN-10 / ASIN: 0198567294
* ISBN-13 / EAN: 9780198567295
* Binding: Hardcover

Book Description:
The Equilibrium Theory of Inhomogeneous Polymers provides an introduction to the field-theoretic methods and computer simulation techniques that are used in the design of structured polymeric fluids. By such methods, the principles that dictate equilibrium self-assembly in systems ranging from block and graft copolymers, to polyelectrolytes, liquid crystalline polymers, and polymer nanocomposites can be established. Building on an introductory discussion of single-polymer statistical mechanics, the book provides a detailed treatment of analytical and numerical techniques for addressing the conformational properties of polymers subjected to spatially-varying potential fields. This problem is shown to be central to the field-theoretic description of interacting polymeric fluids, and models for a number of important polymer systems are elaborated. Chapter 5 serves to unify and expound the topic of self-consistent field theory, which is a collection of analytical and numerical techniques for obtaining solutions of polymer field theory models in the mean-field approximation. The concluding Chapter 6 provides a discussion of analytical methods for going beyond the mean-field approximation and an introduction to the exciting new field of field-theoretic polymer simulations - the direct numerical simulation of polymer field theory models. No other book brings together in such a detailed and instructive fashion the theoretical and numerical tools for investigating the equilibrium structure and thermodynamics of meso-structured polymer formulations, including those relevant to soft material nanotechnologies, personal care products, and multiphase plastic materials.

http://rapidshare.com/files/72928392/Fredr0198567294.rar

´ËÌû±»ÆÀ·Ö,×î½üÆÀ·Ö¼Ç¼²ÝЬ:5(dejunchem)

dejunchem 2007-12-04 00:16
Handbook of Biodegradable Polymers


Biodegradable polymers are niche market materials finding focused applications, including agricultural applications such as mulch films, flowerpots and controlled-release fertilisers and packaging items such as carrier bags and food wrapping and containers. They have the potential to provide a solution to a range of environmental concerns: decreasing availability of landfill space, declining petrochemical sources, and also offer an alternative option to recycling. Rapra's Handbook of Biodegradable Polymers is a complete guide to the subject of biodegradable polymers and is ideal for those new to the subject or those wanting to supplement their existing knowledge. The book covers the mechanisms of degradation in various environments, by both biological and non-biological means, and the methods for measuring biodegradation. The degree and rate of biodegradation is dependent on the chemical composition of the polymer and its working environment, and so there is no single optimal method for determining biodegradation. This handbook provides discussion of international and national standards and certification procedures developed to ensure accurate communication of a material's biodegradability between producers, authorities and consumers. The book goes on to consider the characteristics, processability and application areas for biodegradable polymers, with key polymer family groups discussed.

Book Info:
Published in 2005
Published by Novamont SpA
Author C. Bastioli
ISBN 9057021536 Size 3.56MB


ÏÂÔØµØÖ·:

http://rapidshare.com/files/20288610/handbook_of_biodegradable_polymers_< wind_code_1 >

http://file2upload.com/file/4225/handbook-of-biodegradable-polymers-1859573894.rar.html

http://mihd.net/0ph56i

dejunchem 2007-12-04 00:17
Multiscale Modeling in Epitaxial Growth

Publisher:Birkhäuser Basel | 1999-12-31 | ISBN:3764372087 | Pages: 237 | PDF | 4.6 MB

Book Description:

Epitaxy is a very active area of theoretical research since several years. It is experimentally well-explored and technologically relevant for thin film growth. Recently powerful numerical techniques in combination with a deep understanding of the physical and chemical phenomena during the growth process offer the possibility to link atomistic effects at the surface to the macroscopic morphology of the film. The goal of this book is to summarize recent developments in this field, with emphasis on multiscale approaches and numerical methods. It covers atomistic, step-flow, and continuum models and provides a compact overview of these approaches. It also serves as an introduction into this highly active interdisciplinary field of research for applied mathematicians, theoretical physicists and computational materials scientists.


DOWNLOAD


http://rapidshare.com/files/72614018/Multiscale_Modeling_in_Epitaxial_Growth.rar

dejunchem 2007-12-09 01:49
ɾ

Ò»±¾¾­µä¾ÛºÏÎïÈÈ·ÖÎöµÄÊé

Ò»±¾¾­µä¾ÛºÏÎïÈÈ·ÖÎöµÄÊ飡





http://www.hjcz.org/bbs/read.php?tid-110009.html

dejunchem 2007-12-09 01:50
¸ß¾ÛÎïÓ븴ºÏ²ÄÁϵĶ¯Ì¬Á¦Ñ§ÈÈ·ÖÎö¡·

ÄÚÈÝÌáÒª£º
±¾Êé·ÖÈý¸ö²¿·Ö¡£
½éÉÜÁ˶¯Ì¬Á¦Ñ§ÈÈ·ÖÎöµÄ»ù±¾Ô­Àí¡¢ÊÔÑé·½·¨¼°ÆäÔڸ߷Ö×Ó²ÄÁÏ¡¢¹¤ÒÕÖеÄÓ¦Óá£
µÚÒ»Õ£º¶¯Ì¬Á¦Ñ§ÈÈ·ÖÎö»ù´¡
µÚ¶þÕ£º¶¯Ì¬Á¦Ñ§ÊÔÑé·½·¨
µÚÈýÕ£º¶¯Ì¬Á¦Ñ§ÈÈ·ÖÎöµÄÓ¦ÓþÙÀýÓëµäÐÍͼÆ×

ÏÂÔØµØÖ·£º¸ß¾ÛÎïÓ븴ºÏ²ÄÁϵĶ¯Ì¬Á¦Ñ§ÈÈ·ÖÎö.rar ÏÂÔØÁ´½Ó: http://www.fs2you.com/files/2bbaff05-a529-11dc-9dd6-0014221f4662/

´ËÌû±»ÆÀ·Ö,×î½üÆÀ·Ö¼Ç¼ÍþÍû:1(dejunchem)

dejunchem 2007-12-09 01:51
Materials Selection in Mechanical Design 3rd

Materials Selection in Mechanical Design, Third Edition
By Michael Ashby
? * Publisher: Butterworth-Heinemann
? * Number Of Pages: 624
? * Publication Date: 2005-01-26
? * ISBN-10 / ASIN: 0750661682
? * ISBN-13 / EAN: 9780750661683
? * Binding: Paperback

Book Description:
Understanding materials, their properties and behavior is fundamental to engineering design, and a key application of materials science. Written for all students of engineering, materials science and design, this book describes the procedures for material selection in mechanical design in order to ensure that the most suitable materials for a given application are identified from the full range of materials and section shapes available.
Fully revised and expanded for this third edition, Materials Selection in Mechanical Design is recognized as one of the leading texts, and provides a unique and genuinely innovative resource.
Features new to this edition
New chapters on topics including process selection, material and shape selection, design of hybrid materials, environmental factors and industrial design.
Online tutor resources -- fully worked Instructor's Manual, full color materials selection charts, image bank for lecture presentations.
Reader-friendly approach and attractive, easy to use two-color presentation.
The methods developed in the book are implemented in Granta Design's widely used CES Educational software.
Materials are introduced through their properties; materials selection charts (now available on line) capture the important features of all materials, allowing rapid retrieval of information and application of selection techniques. Merit indices, combined with charts, allow optimization of the materials selection process. Sources of material property data are reviewed and approaches to their use are given. Material processing and its influence on the design are discussed. New chapters on environmental issues, industrial engineering and materials design are included, as are new worked examples, exercise materials and a separate, online Instructor's Manual. New case studies have been developed to further illustrate procedures and to add to the practical implementation of the text.

*The new edition of the leading materials selection text
*Expanded and fully revised throughout, with new material on key emerging topics, an even more student-friendly approach, and attractive, easy to use two-color presentation
*Improved tutor resources, plus supporting online materials and Instructor's Manual

http://rapidshare.com/files/74533689/0750661682.pdf

´ËÌû±»ÆÀ·Ö,×î½üÆÀ·Ö¼Ç¼²ÝЬ:6(dejunchem)

yys 2008-01-07 12:41
îѺϽð·½ÏòÊé¼®

Titanium (Engineering Materials and Processes)
By Gerd L¨¹tjering, James C. Williams,

Publisher:   Springer
Number Of Pages:   442
Publication Date:   2007-06-12
Sales Rank:   356035
ISBN / ASIN:   3540713972
EAN:   9783540713975
Binding:   Hardcover
Manufacturer:   Springer
Studio:   Springer




This comprehensive summary of the current state of the art of titanium addresses, in varying levels of detail, all aspects of titanium, including: basic characteristics and physical metallurgy, the extractive metallurgy, the various production processes, the correlations between processing, microstructure and properties, and all aspects of applications including economic ones. The book covers commercially pure (CP) titanium, alpha + beta and beta alloys, as well as titanium based intermetallics and titanium matrix composites. Richly illustrated with more than 300 figures, this compendium takes a conceptual approach to the physical metallurgy and applications of titanium, making it suitable as a reference and tutorial for materials scientists and engineers.

In this Second Edition the authors included new information on topics that have emerged after the First Edition was completed and published in 2003.




ÏÂÔØÁ´½Ó£ºhttp://rapidshare.com/files/49795374/Lutj_Ti2eEMP.rar
http://depositfiles.com/files/2476258
http://rapidshare.com/files/71944698/3540713972.pdf

yys 2008-01-07 12:43
Stainless Steels

CONTENTS

INTRODUCTION
COMPOSITION AND MECHANICAL PROPERTIES
PHYSICAL PROPERTIES
CORROSION RESISTANCE PROPERTIES
WELDABILITY
FILLER METALS FOR STAINLESS STEELS
FILLER METAL FORMS
WELD DEFECTS/PRACTICAL ADVICE
POST-WELD TREATMENT




ÏÂÔØÁ´½Ó£º
http://mihd.net/sxyq3f
[url]Stainless Steels
Stainless Steels

CONTENTS

INTRODUCTION
COMPOSITION AND MECHANICAL PROPERTIES
PHYSICAL PROPERTIES
CORROSION RESISTANCE PROPERTIES
WELDABILITY
FILLER METALS FOR STAINLESS STEELS
FILLER METAL FORMS
WELD DEFECTS/PRACTICAL ADVICE
POST-WELD TREATMENT




ÏÂÔØÁ´½Ó£º
http://mihd.net/sxyq3f
[url]http://rapidshare.com/files/81115320/AVESTA_POLARIT-_Stainless_steels.rar
http://www.filefactory.com/file/beb807/
FREE DOWNLOAD:
http://www.outokumpu.com/applications/upload/pubs_113155252.pdf
http://www.filefactory.com/file/beb807/
FREE DOWNLOAD:
http://www.outokumpu.com/applications/upload/pubs_113155252.pdf

yys 2008-01-07 12:44
¹âѧ²ÄÁϵÄÒ»±¾ÊéOptical Materials

Optical Materials

By Joseph Simmons, Kelly S. Potter
Publisher:   Academic Press
Number Of Pages:   391
Publication Date:   2000-01-15
ISBN-10 / ASIN:   0126441405
ISBN-13 / EAN:   9780126441406
Binding:   Hardcover


This book presents, in a unified form, the underlying physical and structural processes that determine the optical behavior of materials. It does this by combining elements from physics, optics, and materials science in a seamless manner, and introducing quantum mechanics when needed. The book groups the characteristics of optical materials into classes with similar behavior. In treating each type of material, the text pays particular attention to atomic composition and chemical makeup, electronic states and band structure, and physical microstructure so that the reader will gain insight into the kinds of materials engineering and processing conditions that are required to produce a material exhibiting a desired optical property. The physical principles are presented on many levels, including a physical explanation, followed by formal mathematical support and examples and methods of measurement. The reader may overlook the equations with no loss of comprehension, or may use the text to find appropriate equations for calculations of optical properties.

* Presents the optical properties of metals, insulators, semiconductors, laser materials, and non-linear materials
* Physical processes are discussed and quantified using precise mathematical treatment, followed by examples and a discussion of measurement methods
* Authors combine many years of expertise in condensed matter physics, classical and quantum optics, and materials science
* The text is written on many levels and will benefit the novice as well as the expert
* Explains the concept of color in materials
* Explains the non-linear optical behavior of materials in a unified form
* Appendices present rigorous derivations


Summary: Too many errors
Rating: 2

This book is ambitious in its scope. However it is near abysmal in its editing. There are dozens of errors in the equations and some in the text. Derivations were not checked with original sources and so contain assumptions that are not valid in all cases. As an overall introduction to optical materials this book is OK, but don't rely on it for equations if your job (or your grade) depends on it.

ÏÂÔØÁ´½Ó
http://rapidshare.com/files/74579862/0126441405.rar

yys 2008-01-07 14:16
SpringerÊé¼®£ºFracture Mechanics by E.E. Gdoutos 2005

Contents

Conversion table ix
Preface to the Second Edition xi
Preface xiii
1. Introduction 1
1.1. Conventional failure criteria 1
1.2. Characteristic brittle failures 3
1.3. Griffith's work 5
1.4. Fracture mechanics 10
References 13
2. Linear Elastic Stress Field in Cracked Bodies 15
2.1. Introduction 15
2.2. Crack deformation modes and basic concepts 15
2.3. Westergaard method 17
2.4. Singular stress and displacement fields 20
2.5. Stress intensity factor solutions 27
2.6. Three-dimensional cracks 28
Examples 29
Problems 37
Appendix 2.1 53
References 55
3. Elastic-Plastic Stress Field in Cracked Bodies 57
3.1. Introduction 57
3.2. Approximate determination of the crack-tip plastic zone 58
3.3. Irwin's model 63
3.4. Dugdale's model 65
Examples 68
Problems 73
References 76
4. Crack Growth Based on Energy Balance 79
4.1. Introduction 79
4.2. Energy balance during crack growth 80
4.3. Griffith theory 81
4.4. Graphical representation of the energy balance equation 82
4.5. Equivalence between strain energy release rate
and stress intensity factor 86
4.6. Compliance 89
4.7. Crack stability 91
Examples 94
Problems 106
References 116
5. Critical Stress Intensity Factor Fracture Criterion 117
5.1. Introduction 117
5.2. Fracture criterion 118
5.3. Variation of Kc with thickness 118
5.4. Experimental determination of K\c \T1
5.5. Crack growth resistance curve (§­-curve) method 128
5.6. Fracture mechanics design methodology 133
Examples 134
Problems 145
Appendix 5.1 150
References 151
6. /-Integral and Crack Opening Displacement Fracture Criteria 153
6.1. Introduction 153
6.2. Path-independent integrals 153
6.3. /-integral 155
6.4. Relationship between the /-integral and potential energy 158
6.5. /-integral fracture criterion 160
6.6. Experimental determination of the /-integral 161
6.7. Stable crack growth studied by the /-integral 169
6.8. Crack opening displacement (COD) fracture criterion 170
Examples 176
Problems 184
References 192
7. Strain Energy Density Failure Criterion: Mixed-Mode Crack
Growth 195
7.1. Introduction 195
7.2. Volume strain energy density 196
7.3. Basic hypotheses 199
7.4. Two-dimensional linear elastic crack problems 201
vn
7.5. Uniaxial extension of an inclined crack 203
7.6. Ductile fracture 209
7.7. The stress criterion 213
Examples 215
Problems 228
References 238
8. Dynamic Fracture 239
8.1. Introduction 239
8.2. Mott's model 240
8.3. Stress field around a rapidly propagating crack 243
8.4. Strain energy release rate 246
8.5. Crack branching 248
8.6. Crack arrest 250
8.7. Experimental determination of crack velocity and
dynamic stress intensity factor 250
Examples 253
Problems 260
References 263
9. Fatigue and Environment-Assisted Fracture 265
10. Micromechanics of Fracture 293
References 303
11. Composite Materials 305
11.1. Introduction 305
11.2. Through-thickness cracks 306
Exam
Probk
Introduction
Fatigue crack propagation laws
Fatigue life calculations
Variable amplitude loading
Environment-assisted fracture
References
Micromechanics of Fracture
Introduction
Cohesive strength of solids
Cleavage fracture
Inter granular fracture
Ductile fracture
Crack detection methods
11.3. Interlammar fracture 311
References 322
Thin Films 323
12.1. Introduction 323
12.2. Interfacial failure of a bimaterial system 324
12.3. Steady-state solutions for cracks in bilayers 328
12.4. Thin films under tension 331
12.5. Measurement of interfacial fracture toughness 333
References 338
Nanoindentation 339
13.1. Introduction 339
13.2. Nanoindentation for measuring Young's modulus and hardness 339
13.3. Nanoindentation for measuring fracture toughness 343
13.4. Nanoindentation for measuring interfacial fracture
toughness - Conical indenters 346
13.5. Nanoindentation for measuring interfacial fracture
toughness - Wedge indenters 350
References 352
Cementitious Materials 353
14.1. Introduction 353
14.2. Why fracture mechanics of concrete? 354
14.3. Tensile behavior of concrete 355
14.4. The fracture process zone 357
14.5. Fracture mechanics 359
14.6. Modelling the fracture process zone 359
14.7. Experimental determination of G\c 361
14.8. Size effect 363
14.9. Fiber reinforced cementitious materials (FRCMs) 365
References 365
Index 367

ÏÂÔØµØÖ·£ºhttp://www.isload.com.cn/store/b8b8s2o0opcvv

yys 2008-01-07 14:30
Thermophysical Properties of Materials


Thermophysical Properties of Materials
By G. Grimvall

  * Publisher:   North Holland
  * Number Of Pages:   444
  * Publication Date:   1999-09-01
  * ISBN-10 / ASIN:   0444827943
  * ISBN-13 / EAN:   9780444827944
  * Binding:   Hardcover

Book Description:
This is a thoroughly revised version of the original book published in 1986. About half of the contents of the previous version remain essentially unchanged, and one quarter has been rewritten and updated. The rest consists of completely new and extended material.
Recent research has focussed on new materials made through "molecular engineering", and computational materials science through ab initio electron structure calculations. Another trend is the ever growing interdisciplinary aspect of both basic and applied materials science. There is an obvious need for reviews that link well established results to the modern approaches. One purpose of this book is to provide such an overview in a specific field of materials science, namely thermophysical phenomena that are intimately connected with the lattice vibrations of solids. This includes, e.g., elastic properties and electrical and thermal transport.
Furthermore, this book attempts to present the results in such a form that the reader can clearly see their domain of applicability, for instance if and how they depend on crystal structure, defects, applied pressure, crystal anisotropy etc. The level and presentation is such that the results can be immediately used in research.
Graduate students in condensed matter physics, metallurgy, inorganic chemistry or geophysical materials will benefit from this book as will theoretical physicists and scientists in industrial research laboratories.

http://rapidshare.com/files/81668565/0444827943.rar

yys 2008-01-07 14:33
Handbook of Infra-red Technologies


Handbook of Infra-red Technologies
By M. Henini, M. Razeghi

  * Publisher:   Elsevier Science
  * Number Of Pages:   384
  * Publication Date:   2002-11-01
  * ISBN-10 / ASIN:   1856173887
  * ISBN-13 / EAN:   9781856173889
  * Binding:   Hardcover

Book Description:
The use of lasers which emit infra-red radiation and sophisticated detectors of IR radiation is increasing dramatically: they are being used for long-distance fibre-optic communications and remote environmental monitoring and sensing. Thus they are of interest to the telecommunications industry and the military in particular. This book has been designed to bring together what is known on these devices, using an international group of contributors.


http://rapidshare.com/files/81668618/1856173887.rar

yys 2008-01-07 14:37
Electronic Structure (Handbook of Surface Science)

Electronic Structure (Handbook of Surface Science)
By K. Horn, M. Scheffler

--------------------------------------------------------------------------------



Publisher:   North Holland
Number Of Pages:   1070
Publication Date:   2000-08-01
ISBN-10 / ASIN:   0444892915
ISBN-13 / EAN:   9780444892911
Binding:   Hardcover


--------------------------------------------------------------------------------

Book Description:

This book is the second volume in the Handbook of Surface Science series and deals with aspects of the electronic structure of surfaces as investigated by means of the experimental and theoretical methods of physics. The importance of understanding surface phenomena stems from the fact that for many physical and chemical phenomena, the surface plays a key role: in electronic, magnetic, and optical devices, in heterogenous catalysis, in epitaxial growth, and the application of protective coatings, for example. Therefore a better understanding and, ultimately, a predictive description of surface and interface properties is vital for the progress of modern technology. An investigation of surface electronic structure is also central to our understanding of all aspects of surfaces from a fundamental point of view. The chapters presented here review the goals achieved in the field and map out the challenges ahead, both in experiment and theory.


http://rapidshare.com/files/81668666/0444892915.rar

yys 2008-01-07 14:49
On wave propagation in elastic solids with cracks by Ch. Zhang and D. Gross
Preface

This book contains the essential results obtained by the authors in recent
years in the research area on dynamic fracture mechanics and wave propa-
gation in damaged solids.
Wave propagation in elastic solids with cracks is a very broad and attrac-
tive research field. The corresponding results of this subject have stimulat-
ing and wide-ranging engineering applications such as in materials science,
in-situ safety and reliability control of complex structural components by
acoustic emission, quantitative nondestructive materials testing by ultra-
sonics, dynamic fracture mechanics, seismology and geophysics. For this
reason, the present work is by no means exhaustive. It covers only a few
pieces of a great deal of relevant subjects mentioned above. The references
cited in the work are also not complete and some very important contri-
butions may still be missing in the reference list. As a tool for solving the
boundary-value and the initial boundary-value problems encountered, the
boundary integral equation methods are applied in this work. They are
shown to be very well suited and most useful for this purpose.
Part of the research results presented here was obtained by Ch. Zhang
at the Department of Engineering Mechanics of Tongji University, Shang-
hai, China, and the Department of Civil Engineering, Hochschule fur Tech-
nik, Wirtschaft und Sozialwesen (HTWS) Zittau/Gorlitz (FH), Germany.
Support from the Chinese National Science Foundation, the Committee of
Science and Technology of Shanghai and the Tongji University is gratefully
acknowledged. The research work done at the Institute of Mechanics of
TH Darmstadt, Germany, was partially supported by the German Research
Community (DFG). This institution is also gratefully acknowledged.
The authors would like to express their sincere gratitude to Professor
Dr.-Ing. G. Kuhn, University of Erlangen, Germany, for carefully reviewing
the first draft of the work and for his constructive comments. Ch. Zhang is
much obliged to Professor J. D. Achenbach, Northwestern University, USA,
for his kind encouragement and stimulating discussions over the past years.
His initial guidance was very important to the research career of the first
author. Finally, many thanks are due to our colleagues at the Department of
Engineering Mechanics of Tongji University, Shanghai, China, the Institute
of Mechanics of TH Darmstadt, and the Department of Civil Engineering
of HTWS Zittau/Gorlitz (FH), Germany, for their collaboration and many
fruitful discussions.
Wave propagation in elastic solids with cracks is a very interesting but
also a quite complex research field. Despite a great deal of advanced theo-
retical and experimental investigations carried out in recent years, many
questions remain unanswered and further intense research efforts are re-
quired. The authors would be happy, if the present book could provide a
few useful pointers to interested readers who are working on this stimulating
and challenging research subject.
            Ch. Zhang, Zittau and D. Gross, Darmstadt, Germany

ÏÂÔØµØÖ·£ºhttp://www.isload.com.cn/store/qmswz6ygeyxwa

yys 2008-01-08 14:09
¾Û°±õ¥½ºÕ³¼Á

×÷Õß:ÀîÉÜÐÛ
³ö°æÉç:»¯Ñ§¹¤Òµ³ö°æÉç
³ö°æÈÕÆÚ:2001Äê4ÔÂ
Ò³Êý:422
×°Ö¡:
¿ª±¾: °æ´Î:1
ISBN:7502521**

±¾ÊéΪÂÛÊö¾Û°±õ¥½ºÕ³¼ÁµÄʵÓÃÐͼ¼ÊõÖø×÷,¶Ô¸ÃÁìÓò×öÁËÈ«¹ú½éÉÜ¡£°üÀ¨µ¥×é·Ö¾Û°±õ¥½ºÕ³¼Á¡¢Ë«×é·Öì°±õ¥½ºÕ³¼Á¡¢Ë®ÐÔ¾Û°±õ¥½ºÕ³¼Á¡¢¶àÒìÇèËáõ¥½ºÕ³¼Á¡¢¾Û°±õ¥Ãܷ⽺¡¢¾Û°±õ¥Õ³ºÏ¼ÁµÄÖÆÔìÓëÓ¦Óü¼Êõ,ÒÔ¼°Éú²ú¾Û°±õ¥Õ³¼ÁËùÓÃÔ­ÁÏ¡¢Õ³½Ó»úÀí¡¢ËùÓÐÉ豸¡¢¹¤ÒÕÌõ¼þÓëÐÔÄܲâÊÔ·½·¨¡£¸ÃÊéÌØµã¾ßÌåʵÓÃ,¼ÈÓйúÄÚÍâ³É¹ûµÄ×ܽá,Ò²Óзḻʵ¼ù¾­ÑéµÄÌáÁ·,ÐðÊö¼ò½àÃ÷È·,Ö±¹Û±ã½Ý,ÐÐÎÄÁ÷³©¡£³ýÊÊÓÃÓÚ¾Û°±õ¥¿ÆÑС¢Éú²ú¡¢½ÌѧÁìÓò¼¼ÊõÈËÔ±Íâ,¼øÓÚ¶ÔÆäʵ¼ÊÊ©ÓᢾßÌå²Ù×÷Ò²ÓнéÉÜ,¹Ê¶Ô¾Û°±õ¥Ó¦Óò¿ÃÅÈËÔ±Ò฻²Î¿¼¼ÛÖµ¡£

µÚÒ»Õ Ð÷ÂÛ
1 ¾Û°±õ¥½ºÕ³¼ÁµÄ·¢Õ¹Ê·
2 ¾Û°±õ¥½ºÕ³¼ÁµÄÎïÐÔ
3 ¾Û°±õ¥½ºÕ³¼ÁµÄ·ÖÀà
4 ¹úÄÚ¾Û°±õ¥½ºÕ³¼ÁµÄÉú²ú¸Å¿ö
5 ¹úÄÚ¾Û°±õ¥½ºÕ³¼ÁµÄÉú²ú¸Å¿ö
²Î¿¼ÎÄÏ×
µÚ¶þÕ ¾Û°±õ¥»¯Ñ§¼°Õ³½Ó»úÀí
1 ¾Û°±õ¥»¯Ñ§
2 ¾Û°±õ¥µÄ½á¹¹ÓëÐÔÄÜ
3 Õ³½Ó»úÀí
4 Õ³½Ó¹¤ÒÕ
5 ¾Û°±õ¥½ºÕ³¼ÁµÄÅä·½Éè¼Æ
6 ¾Û°±õ¥½ºÕ³¼ÁµÄÓйؼÆËã
²Î¿¼ÎÄÏ×
µÚÈýÕ ¾Û°±õ¥Õ³¼ÁÔ­ÁÏ
1 ÒìÇèËáõ¥
2 ¾Ûõ¥¶àÔª´¼
3 ¾ÛÃѶàÔª´¼
4 ÆäËûµÍ¾ÛÎï¶àÔª´¼
5 Öú¼Á
²Î¿¼ÎÄÏ×
µÚËÄÕ ¶àÒìÇèËáõ¥Õ³¼Á
1 ¸ÅÊö
2 Èý±½»ù¼×Íé-4¡¢4¡¢4"-ÈýÒìÇèËáõ¥½ºÕ³¼Á
3 Áò´úÁ×ËáÈý½ºÕ³¼Á
4 ËÄÒìÇèËáõ¥½ºÕ³¼Á
5 ¡°ÆßÒìÇèËὺճ¼Á
6 ¶þ±½»ù¼×Íé¶þÒìÇèËáõ¥½ºÕ³¼Á
7 ÈýôǼ׻ù±ûÍé-TDT¼Ó³ÉÎï
8 Ëõ¶þëå¶àÒìÇèËáõ¥
9 Èý¾Û¶àÒìÇèËáõ¥
10 ¶àÒìÇèËáÔ¤¾ÛÌå
²Î¿¼ÎÄÏ×
µÚÎåÕ ˫×é·Ö¾Û°±õ¥½ºÕ³¼Á
¡­¡­
µÚÁùÕ µ¥×é·Ö¾Û°±õ¥½ºÕ³¼Á
µÚÆßÕ ˮÐÔ¾Û°±õ¥Õ³¼Á
µÚ°ËÕ ¾Û°±õ¥Õ³ºÏ¼Á
µÚ¾ÅÕ ¾Û°±õ¥Ãܷ⽺
µÚʮՠ·ÖÎöºÍ²âÊÔ
¸½Â¼
²Î¿¼ÎÄÏ×


http://www.fs2you.com/files/38740d54-bce1-11dc-9592-0014221b798a/

yys 2008-01-08 14:58
Supercritical Carbon Dioxide in Polymer Reaction Engineering


Supercritical Carbon Dioxide: in Polymer Reaction Engineering (Green Chemistry (Wiley)) (Hardcover)
by Maartje F. Kemmere (Editor), Thierry Meyer (Editor)
Product Details

Hardcover: 358 pages
Publisher: Wiley-VCH (November 11, 2005)
Language: English
ISBN-10: 3527310924
ISBN-13: 978-3527310920
Product Dimensions: 9.5 x 6.7 x 0.9 inches
Shipping Weight: 1.8 pounds (View shipping rates and policies)
Book Description
Recently, supercritical fluids have emerged as more sustainable alternatives for the organic solvents often used in polymer processes. This is the first book emphasizing the potential of supercritical carbon dioxide for polymer processes from an engineering point of view. It develops a state-of-the-art overview on polymer fundamentals, polymerization reactions and polymer processing in supercritical carbon dioxide. The book covers topics in a multidisciplinary approach starting from polymer chemistry and thermodynamics, going through monitoring, polymerization processes and ending with polymer shaping and post-processing.

The authors are internationally recognized experts from different fields in polymer reaction engineering in supercritical fluids. The book was initiated by the Working Party on Polymer Reaction Engineering of the European Federation of Chemical Engineering and further renowned international experts.

http://www.fs2you.com/files/5634cfa8-bd89-11dc-ac38-0014221f4662/

yys 2008-01-08 15:52
Polymer-Solvent Molecular Compounds

Polymer-Solvent Molecular Compounds
By Jean-Michel Guenet


  * Publisher:   Elsevier Science
  * Number Of Pages:   315
  * Publication Date:   2007-12-24
  * ISBN-10 / ASIN:   0080451446
  * ISBN-13 / EAN:   9780080451442
  * Binding:   Hardcover

Book Description:
Crystallisable polymers represent a large share of the polymers used for manufacturing a wide variety of objects, and consequently have received continuous attention from scientists these past 60 years.
Molecular compounds from crystallisable polymers, particularly from synthetic polymers, are receiving growing interest due to their potential application in the making of new materials such as multiporous membranes capable of capturing large particles as well as small pollutant molecules. The present book gives a detailed description of these promising systems.
The first chapter is devoted to the presentation of important investigational techniques and some theoretical approaches. The second chapter is devoted to biopolymers, the first polymers known to produce molecular compounds, chiefly with water. The third chapter deals with synthetic polymers where compound formation is either due to hydrogen-bonding or to electrostatic interactions. The fourth chapter describes intercalates and clathrates systems for which compound formation is mainly due to a molecular recognition process.

- First book on the subject
- Gives a short but exhaustive description of investigational tools
- Covers both biopolymers and synthetic polymers
- Uses temperature-concentration phase diagrams abundantly for describing the systems
- Describes systems from the nano to the microscopic level, including mechanical properties

PDF 8.9 Mb with bookmarks and page links in Contents & Index ; RAR 7.8 Mb
pass: tFPSOMOC.rar

http://rapidshare.com/files/82006928/PSOMOC.rar

yys 2008-01-12 14:58
2008 Handbook of Specialty Elastomers

Handbook of Specialty Elastomers
By Robert C. Klingender

--------------------------------------------------------------------------------



Publisher:   CRC
Number Of Pages:   576
Publication Date:   2008-01-04
ISBN-10 / ASIN:   1574446762
ISBN-13 / EAN:   9781574446760
Binding:   Hardcover


--------------------------------------------------------------------------------

Book Description:

Written and edited by experts on specialty elastomers applications in the mechanical and automotive products industries, the Handbook of Specialty Elastomers provides a single source reference for the design of compounds using specialty elastomers.

This book defines specialty elastomers as heat-, oil-, fuel-, and solvent-resistant polymers. Each chapter examines individual elastomers in terms of development history, chemical composition, structure, and properties as well as processing methods, applications, and commercially available products. Covering their applications in the rubber, energy, chemicals, and oil industries, the book also discusses the use of antioxidants, antiozonants, vulcanization agents, plasticizers, and process aids for specialty elastomers. The concluding chapter details considerations and relevant processessuch as molding operationsinvolved in designing application-specific rubber components.

The Handbook of Specialty Elastomers provides comprehensive insight into the processes and challenges of designing rubber formulations and specialty elastomeric components.

pass: tFHOSE.rar

http://rapidshare.com/files/83036744/HOSE.rar

yys 2008-01-12 15:03
X-Ray Diffraction by Polycrystalline Materials
By Rene Guinebretiere


Publisher:   ISTE Publishing Company
Number Of Pages:   288
Publication Date:   2008-02-04
ISBN-10 / ASIN:   1905209215
ISBN-13 / EAN:   9781905209217
Binding:   Hardcover



This book presents a physical approach to the diffraction phenomenon and its applications in materials science.
An historical background to the discovery of X-ray diffraction is first outlined. Next, Part 1 gives a description of the physical phenomenon of X-ray diffraction on perfect and imperfect crystals. Part 2 then provides a detailed analysis of the instruments used for the characterization of powdered materials or thin films. The description of the processing of measured signals and their results is also covered, as are recent developments relating to quantitative microstructural analysis of powders or epitaxial thin films on the basis of X-ray diffraction.
Given the comprehensive coverage offered by this title, anyone involved in the field of X-ray diffraction and its applications will find this of great use.

http://mihd.net/4jivuq
http://rapidshare.com/files/82502160/1905209215.rar

yys 2008-01-18 15:44
¸ß·Ö×ÓÓë¼ÆËã»ú½áºÏµÄºÃÊé¡¶·Ö×ÓÄ£ÄâÓë¸ß·Ö×Ó²ÄÁÏ¡·

ÊéÃû£º¡¶·Ö×ÓÄ£ÄâÓë¸ß·Ö×Ó²ÄÁÏ¡·


×÷ÕߣºÑîСÕð
³ö°æÉ磺¿ÆÑ§³ö°æÉç
Àà±ð£º¼ÆËã»ú»¯Ñ§»¯¹¤´ÔÊé
˵Ã÷£ºÖйú¿ÆÑ§Ôº³ö°æ»ù½ð×ÊÖú³ö°æ£¬¹ú¼Ò×ÔÈ»¿ÆÑ§»ù½ðίԱ»á×ÊÖú³ö°æ
ÄÚÈݼò½é£º±¾Êé½éÉܽüÄêÀ´·ÉËÙ·¢Õ¹µÄÁîÊÀÈËÖõÄ¿µÄ·Ö×ÓÄ£Äâ¼¼Êõ¼°ÆäÔڸ߷Ö×Ó²ÄÁÏÑо¿ºÍÉè¼ÆÖеÄÓ¦ÓÃ.
µÚÒ»ÕÂÖÁµÚÁùÕ½éÉÜ·Ö×ÓÄ£ÄâµÄ»ù±¾Ô­ÀíºÍ·Ö×ÓÄ£ÄâÖеÄÎåÖÖÓÐЧ·½·¨¡ª¡ª·Ö×ÓÁ¦³¡¡¢·Ö×ÓÁ¦Ñ§·½·¨¡¢·Ö×Ó¶¯Á¦Ñ§·½·¨¡¢·Ö×ÓÃÉÌØ¿¨Âå·½·¨ºÍ½é¹ÛÄ£Äâ;
µÚÆßÕÂÖÁµÚÊ®°ËÕ½éÉÜ·Ö×ÓÄ£ÄâÔڸ߷Ö×Ó²ÄÁÏÑо¿ºÍÉè¼ÆÖеÄÓ¦Ó㬰üÀ¨:·Ö×ÓÄ£ÄâÈí¼þÄ£Äâ(MP)¡¢·Ö×Óʶ±ðÓë´ß»¯¼ÁµÄÑ¡ÔñÐÔ¡¢´ß»¯¼Á»îÐÔµÄÔ¤±¨¡¢¸ß·Ö×ÓÁ´¹¹Ïó̬µÄԾǨ¡¢¸ß·Ö×ÓÁ´Í³¼Æ³ß´çÔ¤±¨¡¢¸ßÐÔÄÜÊ÷Ö¬µÄÐÔÄÜÔ¤±¨¡¢¸ß·Ö×Ó²£Á§Ì¬µÄÔ˶¯Óë²£Á§»¯×ª±ä¡¢¸ß·Ö×ÓÁ´µÄ½á¾§ÐÐΪ¡¢¸ß·Ö×ÓµÄÏàÈÝÐÔ¡¢¸ß·Ö×ÓÊÜÏÞÁ´µÄìØÓëìÊ¡¢¸ß·Ö×ӵĹ¹Ïóµ¯ÐԺͷÖ×Ó¹âÆ×µÄÔ¤±¨¡£±¾Êé½éÉÜÁË·Ö×ÓÄ£ÄâÔڸ߷Ö×Ó²ÄÁÏÑо¿ºÍÉè¼ÆÖеÄ×îгɹû£¬²»½ö¶Ô¸÷Àà´Óʸ߷Ö×ÓÑо¿ºÍÉè¼ÆµÄÈËÔ±ÓÐÖØÒªµÄ²Î¿¼¼ÛÖµ£¬¶øÇÒ¶ÔÏà¹ØµÄ¿ÆÑÐÈËÔ±¡¢¼¼ÊõÈËÔ±¡¢Ñо¿Éú¾ùÓкܸߵIJο¼¼ÛÖµ¡£


ÏÂÔØµØÖ·£ºhttp://www.isload.com.cn/store/vscvi2vsuucqw/%B7%D6%D7%D3%C4%A3%C4%E2%D3%EB%B8%DF%B7%D6%D7%D3%B2%C4%C1%CF.pdf/downlaod

yys 2008-01-19 15:26
Polymer-Solvent Molecular Compounds Elsevier2007.12ÔÂÐÂÊé
Polymer-Solvent Molecular Compounds Elsevier2007.12ÔÂÐÂÊé


¡¾Êé¼®Ãû³Æ¡¿£ºPolymer-Solvent Molecular Compounds

¡¾×÷   Õß¡¿£º Jean-Michel Guenet

¡¾³ö °æ Éç¡¿£ºElsevier Science Publishing Company

¡¾°æ´Îʱ¼ä¡¿£ºµç×Ó°æ: NOV-2007

¡¾·âÃæÍ¼Æ¬¡¿£º



¡¾ÄÚÈݼò½é¡¿£º
    Crystallisable polymers represent a large share of the polymers used for manufacturing a wide variety of objects, and consequently have received continuous attention from scientists these past 60 years.
Molecular compounds from crystallisable polymers, particularly from synthetic polymers, are receiving growing interest due to their potential application in the making of new materials such as multiporous membranes capable of capturing large particles as well as small pollutant molecules. The present book gives a detailed description of these promising systems.
The first chapter is devoted to the presentation of important investigational techniques and some theoretical approaches. The second chapter is devoted to biopolymers, the first polymers known to produce molecular compounds, chiefly with water. The third chapter deals with synthetic polymers where compound formation is either due to hydrogen-bonding or to electrostatic interactions. The fourth chapter describes intercalates and clathrates systems for which compound formation is mainly due to a molecular recognition process.

- First book on the subject
- Gives a short but exhaustive description of investigational tools
- Covers both biopolymers and synthetic polymers
- Uses temperature-concentration phase diagrams abundantly for describing the systems
- Describes systems from the nano to the microscopic level, including mechanical properties


http://www.fs2you.com/files/fb9a1563-c63e-11dc-ae9e-0014221f3995/

yys 2008-01-24 12:20
CRC Handbook of Chemistry and Physics on CD-ROM Version 2007

David R. Lide; CRC Handbook of Chemistry and Physics on CD-ROM Version 2007
CRC
English
RAR
143 MB

The Handbook of Chemistry and Physics on CD-ROM, Version 2007 provides a thorough range of critically evaluated data in a convenient, electronic format. This CD-ROM edition contains all of the information found in the 87th print edition augmented by a range of special utilities, such as structure searching, interactive data management, cross-table searching by topic or structure, and powerful data selection tools that allow you to customize the display and export data. This year updates and expands many of the most heavily used tables in the book, including: ¡¤ Physical Properties of Inorganic Compounds - Features nearly 25% more compounds ¡¤ Enthalpy of Fusion - Contains updated values and 20% more compounds, especially inorganics ¡¤ Bond Dissociation Energies - Includes 70% more compounds, including for the first time more than 1200 molecular ions ¡¤ Table of the Isotopes - Brought up to date with research results through the year 2005 ¡¤ Inorganic Ion and Ligand Nomenclature - Incorporates new rules from IUPAC for systematic names ¡¤ Chemical Carcinogens - Updated in accordance with the recent report from the National Toxicology Program ¡¤ Global Temperature Trend - Traces the rise in mean global temperature for the last 150 years


[url]http://rapidshare.com/files/85699941/handbook.of.chemistry.and.physics.8th.ed-0849328780.part1.rar
[url]http://rapidshare.com/files/85691236/handbook.of.chemistry.and.physics.8th.ed-0849328780.part2.rar

xinga 2008-02-03 11:49
¾ÛºÏÎï¹²»ìÎïÓëºÏ½ð(pdf)(È«374Ò³)

http://www.hjcz.org/bbs/read.php?tid-115480.html

yys 2008-03-10 13:38
¡¶Handbook of Silicone Rubber Fabrication¡·

Handbook of Silicone Rubber Fabrication
By Deidre Shauna Lynch, Wilfred Lynch

--------------------------------------------------------------------------------



Publisher:   Van Nostrand Reinhold Company
Number Of Pages:   257
Publication Date:   1997-06
ISBN-10 / ASIN:   0442249624
ISBN-13 / EAN:   9780442249625
Binding:   Hardcover

ÏÂÔØÁ´½Ó
http://rapidshare.com/files/97664307/Handbook_of_Silicone_Rubber_Fabrication.rar

bingxing 2008-04-17 09:48
Handbook of Environmental Degradation of Materials_muyac.rar -
COST OF CORROSION IN THE
UNITED STATES
Gerhardus H. Koch
Michiel P. H. Brongers
Neil G. Thompson
CC Technologies Laboratories, Inc., Dublin, Ohio
Y. Paul Virmani
Federal Highway Administration, Turner-Fairbank Highway Research Center, McLean, Virginia
Joe H. Payer
Case Western Reserve University, Cleveland, Ohio
3
1.1 INTRODUCTION 3
1.2 OBJECTIVES AND SCOPE 3
1.3 APPROACH 3
1.4 RESULTS 6
1.5 DISCUSSION 20
1.6 PREVENTIVE STRATEGIES 21
1.7 ACKNOWLEDGMENTS 22
1.8 REFERENCES 22
1.1 INTRODUCTION
The latest Cost of Corrosion Study(1) (2001) conducted
by CC Technologies for the Federal Highway
Administration (FHWA) focused on infrastructure,
utilities, transportation, production and manufacturing,
and government. It was determined that the total
direct cost of corrosion in the United States is approximately
$276 billion per year, which is 3.1 percent
of the nation¡¯s gross domestic product (GDP).
This chapter presents the results of this recent study.
Corrosion costs result from equipment and structure
replacement, loss of product, maintenance and
repair, the need for excess capacity and redundant
equipment, corrosion control, designated technical
support, design, insurance, and parts and equipment
inventories. Previous studies in the United States(2¨C4)
and abroad(5¨C8) had already shown that corrosion is
very costly and has a major impact on the economies
of industrial nations. While all these studies emphasized
the financial losses due to corrosion, no systematic
study was conducted to investigate preventive
strategies to reduce corrosion costs.
1.2 OBJECTIVES AND SCOPE
The primary objectives of this study were:
1. Develop an estimate of the total economic impact
of metallic corrosion in the United States.
2. Identify national strategies to minimize the impact
of corrosion.
The work to accomplish these objectives was conducted
through the following main activities:
• Determination of the cost of corrosion, based on
corrosion control methods and services.
• Determination of the cost of corrosion for specific
industry sectors.
• Extrapolation of individual sector costs to a national
total corrosion cost.
• Assessment of barriers to progress and effective
implementation of optimized corrosion control
practices.
• Development of implementation
<a href="http://www.namipan.com/d/76481f00a1dce6089d12ca7627376130e89e53eec7512701">Handbook of Environmental Degradation of Materials_muyac.rar</a>

yys 2008-04-23 17:20
¡¶Characterization of Powders and Aerosols¡·


By Brian H. Kaye



Publisher: Wiley-VCH
Number Of Pages: 323
Publication Date: 1999-03-05
ISBN-10 / ASIN: 3527288538
ISBN-13 / EAN: 9783527288533
Binding: Hardcover



Characterization of fine particles is a difficult task!

A large number of industries deal with materials in powder form. The properties of these powders depend on their particle size, particle shape and size distributions, surface and porosity.

What are the methods?
What are the problems?
What questions need answering?

This new book covers the problems of sampling both powders and aerosols, and discusses calibration standards for different instruments. It takes into account fractionating methods for fine particles, e.g., sieving procedures, sedimentation methods, and the use of cyclones. Image analysis and its use for the measurement of the size and shape of powder grains and light-diffraction techniques for size evaluation are presented. Furthermore, this books covers the most effective methods for measuring surface areas, fractal structures of rough surfaces, and pore structures of porous bodies. Practitioners will find tips for modification of analytical procedures for on-line characterization, and many graphs for comparing data obtained by different methods are presented.


http://www.mediafire.com/?wmsg11j50cy
http://mihd.net/lskrz1d/
http://rapidshare.com/files/109420056/ChaPowanAerowil3527288538.rar.html

yys 2008-04-23 17:23
¡¶Powder Technology Handbook, Third Edition¡·


By Hiroaki Masuda, Ko Higashitani, Hideto Yoshida



Publisher: CRC
Number Of Pages: 920
Publication Date: 2006-01-13
ISBN-10 / ASIN: 1574447823
ISBN-13 / EAN: 9781574447828
Binding: Hardcover


The Powder Technology Handbook, Third Edition provides a comprehensive guide to powder technology while examining the fundamental engineering processes of particulate technology. The book offers a well-rounded perspective on powder technologies that extends from particle to powder and from basic problems to actual applications.

Providing comprehensive coverage of powder/particle handling methods and unit operations, this handbook prepares the reader for solving new problems using an integrated approach. By presenting problems in wet processes and particles in liquids alongside those encountered with dry powder processes, it offers strategies for finding the optimal solutions to problems in any context. The book contains new sections on particle motion in fluids, design and formulation of composite particles, combustion and heating, electrostatic powder coating, attrition of a particle, breakage of aggregates, and the particle motion, rheology, and electrical properties of a powder bed. It also discusses recently developed areas of study such as simulation, surface analysis, and nanoparticles.

Maintaining the standard of quality found in the previous bestselling editions, the third edition of the Powder Technology Handbook reflects the most recent advances and provides convenient access to processes and properties of particulate technology.



http://www.mediafire.com/?jmxjy5lzm91

http://mihd.net/s2xtolu/
http://rapidshare.com/files/109423729/PoTechHaThirEdcrc.rar.html

yys 2008-05-27 15:09
¡¶Fluoropolymers : Synthesis¡·


Fluoropolymers : Synthesis,
(Topics in Applied Chemistry) h.=YAcR0D
By Gareth G. Hougham, Patrick E. Cassidy, Ken Johns, Theodore Davidson
Publisher: Springer
Number Of Pages: 338
Publication Date: 1999-10-31
ISBN-10 / ASIN: 0306460602
ISBN-13 / EAN: 9780306460609
Binding: Hardcover
The fluorine atom, by virtue of its electronegativity, size and bond strength with carbon, can be used to create compounds with remarkable properties. Small molecules containing fluorine have many positive impacts on everyday life of which blood substitutes, pharmaceuticals and surface modifiers are only a few examples.  
Fluoropolymers, too, while traditionally associated with extreme high-performance applications have found their way into our homes, our clothing and even our language.  
Much progress has been made in understanding the sometimes confounding properties of fluoropolymers. Computer simulation is now contributing to this with new fluorine force fields and other parameters, bringing realistic prediction within reach of the practicing physical chemist.
Fluoropolymers 1: Synthesis and Fluoropolymers 2: Properties attempt to bring together in one place the chemistry, physics and engineering properties of fluoropolymers. The collection was intended to provide balance between breadth and depth, with contributions ranging from the introduction of fluoropolymer structure-property relationships, to reviews of subfields, to more focused topical reports.

http://www.91files.com/?73Y1T0D2IPS82DGE6747

yys 2008-06-15 09:51
¡¶Failure Criteria in Fibre Reinforced Polymer Composites¡·£¨×ª£©
Ò»±¾¹ØÓÚÏËά·½ÃæµÄÊ飬ϣÍû¶Ô´ó¼ÒÓÐÓã¡
By
M. Hinton, Defence Evaluation and Research Agency (DERA), Structural Materials Centre, Kent, UK
P Soden, UMIST, Applied Mechanics Division, Manchester, UK
Abdul-Salam Kaddour, QinetiQ Ltd, Hampshire, UK

Description
Fiber reinforced polymer composites are an extremely broad and versatile class of material.Their high strength coupled with lightweight leads to their use wherever structural efficiency is at a premium. Applications can be found in aircraft, process plants, sporting goods and military equipment. However they are heterogeneous in construction and antisotropic, which makes making strength prediction extremely difficult especially compared to that of a metal. This book brings together the results of a 12year worldwide failure exercise encompassing 19 theories in a single volume. Each contributor describes their own theory and employs it to solve 14 challenging problems. The accuracy of predictions and the performance of the theories are assessed and recommendations made on the uses of the theories in engineering design. All the necessary information is provided for the methodology to be readily employed for validating and benchmarking new theories as they emerge



http://www.namipan.com/d/Failure%20Criteria%20in%20Fibre%20Reinforced%20Polymer%20Composites.rar/8a1a00fe7d3e9898662a7f06971ff9071d0a260a165cec00


²é¿´ÍêÕû°æ±¾: [-- ºì¾ü³¤Õ÷ϵÁÐÊéϵ--¸ß·Ö×Ó×Ó£¨·¢²¼Êé¼®Õ߸úÓë´ËÌûºó£¬·ñÔò²»ÓèÆÀ·Ö£© --] [-- top --]


ºì¾ü³¤Õ÷×ÔÓɹ²Ïí QQȺ£º ÎÄÏ×ÇóÖúQQȺ:32726645  32726645   Õ½Óѽ»Á÷QQȺ:32726700  32726700
Time 0.420381 second(s),query:4 Time now is:, Gzip enabled
----------------------------------------------------
ºì¾ü³¤Õ÷×ÔÓɹ²ÏíÂÛ̳½ö½öÊǸø¹úÈËÌṩÁËÒ»¸ö¿ÆÑÐѧϰÓéÀֵį½Ì¨£»
Æä±¾ÒâÊÇ´Ù½ø´ó¼ÒµÄ½»Á÷£¬´Ó¶ø´ïµ½Ìá¸ß¹úÄÚ¿ÆÑÐˮƽµÄÄ¿µÄ£»
ÔÚÂÛ̳ÄÚµÄËùÓÐÂÛÑÔ½ö½ö´ú±íÁË·¢ÌùÈ˵Ĺ۵㣬Óëºì¾ü³¤Õ÷ÂÛ̳Î޹أ»
ÈçÓÐÄú¾õµÃÓÐÈκβ»Í×Ö®´¦£¬Ç뼰ʱÁªÏµ£¬hjcz.org@gmail.com£¡
Copyright@http://www.hjcz.org, all rights reserved
ezproxy|´úÀí|¼ÓÃÜ´úÀí|VPN|webVPN|ÎÄÏ×|ÎÄÏ×¼ìË÷
hjcz.org| hjcz.cn| hjcz.org.cn| hjcz.net.cn
Powered by PHPWind V4.32 Code © 2003-06
³ICP±¸05027585ºÅ
___________________________________________________
Only two kinds of animals in the world can reach the top of pyramid.
One is eagle; the other is snail.
Not a eagle if you are, just be a snail.
Then to be : Stand on the shoulders of giants.